_______________________________________________________________________________________

_______________________________________________________________________________________
Showing posts with label Fit Test. Show all posts
Showing posts with label Fit Test. Show all posts

September 19, 2012

Fit Test Operator Training 26th September

A new course has recently been posted on the NDTG website. It is entitled Fit Test Operator Training - Qualitative and begins at 9:30am on the 26th September.

The training course is being held in Hemel Hempstead with the cost being £180 +VAT for members or £220 +VAT for non-members.

The course is aimed at those who are involved in the Qualitative Fit Testing process of personnel. The objective being to equip users with the skills and knowledge to be able to undertake qualitative fit testing.

The subjects covered as part of the course include:
  • Regulations and Guidance
  • The Purpose and Applicability of Fit Testing
  • Procedures for Selection of Adequate and Suitable RPE
  • Fit Factors and Protection Factors
  • Examination Procedures for RPE
  • RPE Training
  • Correct Donning Procedures and Pre-Use Fit Checks
  • Fit Test Procedures and Purpose of the Fit Test Exercises
  • Capabilities and Limitations of the Fit Test Equipment Set up and Diagnostic checks
  • PRACTICAL FIT TESTING
  • Troubleshooting & Problem Solving
  • Fit Test Failures
  • How to Plan and Manage Face Fit Testing Programme
  • Interpretation of Fit Test Reports
  • Data Handling and Storage
  • Questions / Summary
More information and a link to the reservation page can be found on the NDTG website.

September 3, 2010

Face fitting of paper masks

John has been receiving a lot of enquiries regarding the face fitting of paper masks. As part of out RPE (Respiratory Protective Equipment) Employee Awareness & Fit Test we ensure you know what the requirements are.

Here's our guidance away from the training course:

The requirement for RPE Face Mask Fit Testing is described in the Approved Code of Practices supporting:

* The Control of Substances Hazardous to Health Regulations (COSHH) 2002

* The Control of Lead at Work Regulations (CLAW) 2002

* The Control of Asbestos Regulations 2006

Face mask fit testing is a legal requirement for checking that a tight fitting face mask matches the person's facial features and seals adequately to the wearer's face. It will also help ensure that incorrectly fitting face masks are not selected for use.

An inadequate fit will significantly reduce the protection provided to the wearer. Any reduction in protection can put the RPE wearer's life in danger or may lead to immediate or long term ill health. Correct fitting of the face masks at all times is vital to prevent exposure.

Our course covers:

  • Legislation

  • Employee awareness

  • Risks and dangers of incorrectly fitting masks

  • Importance of selecting correct RPE

  • Face mask fit demonstration

  • Individual face mask fit & evaluation

RPE Awareness & Fit Test

RPE (RESPIRATORY PROTECTIVE EQUIPMENT)

EMPLOYEE AWARENESS & FIT TEST

Introduction

The requirement for RPE training and Face Mask Fit Testing is described in the Approved Code of Practices supporting:

HASAW 1974

The Control of Substances Hazardous to Health Regulations (COSHH) 2002

The Control of Lead at Work Regulations (CLAW) 2002

The Control of Asbestos Regulations 2006

Face mask fit testing is a legal requirement for suitability of RPE by checking that a tight fitting face mask matches the person's facial features and seals adequately to the wearer's face. It will also help ensure that incorrectly fitting face masks are not selected for use.

Inadequate fit is not in compliance with the law and will significantly reduce the protection provided to the wearer. Any reduction in protection can put the RPE wearer's life in danger or may lead to immediate or long term ill health. Correct fitting of the face masks at all times is vital to prevent exposure.

Aims 

The course will help ensure compliance with the law covering suitability of RPE selection, use, maintenance and Fit Testing in line with current Legislation. The purpose of the test is simply to ensure that the chosen mask actually fits the wearer and has the potential, if correctly worn, to offer the minimum level of protection it is designed for.

The Course includes:

* Legislation
* Employee awareness
* Risks and dangers of incorrectly fitting masks
* Importance of selecting correct RPE
* Face mask fit demonstration
* Looking after RPE
* Individual face mask fit & evaluation

Please ensure:

You bring your RPE Face Mask

Arrive clean shaven

Do not eat, drink or smoke 1 hour before the face fit


Delegates will be issued with a Certificate of Attendance.